Updating Your Tv Via Usb; Information On The Software License For This Product - Sharp Aquos LC-40LE820X Operation Manual

Appendix

Updating your TV via USB

This function allows you to update to the latest
software using a USB device. You must update the
software through the USB terminal.
Press MENU and the MENU screen displays.
1
Press c / d to select "Setup".
2
Press b / c / d to select "Information".
3
Press a / b to select "Software update", and
4
then press ENTER.
Press ENTER and then insert the USB device
5
containing the software update fi le.
CAUTION
• Be sure to insert the USB device correctly into the terminal.

Information on the software license for this product

Software composition
The software included in this product is comprised of various software components whose individual copyrights are held by
SHARP or by third parties.
Software developed by SHARP and open source software
The copyrights for the software components and various relevant documents included with this product that were developed
or written by SHARP are owned by SHARP and are protected by the Copyright Act, international treaties, and other relevant
laws. This product also makes use of freely distributed software and software components whose copyrights are held by
third parties. These include software components covered by a GNU General Public License (hereafter GPL), a GNU Lesser
General Public License (hereafter LGPL) or other license agreement.
Obtaining source code
Some of the open source software licensors require the distributor to provide the source code with the executable software
components. GPL and LGPL include similar requirements. For information on obtaining the source code for the open source
software and for obtaining the GPL, LGPL, and other license agreement information, visit the following website:
http://www.sharp.net.au
We are unable to answer any questions about the source code for the open source software. The source code for the
software components whose copyrights are held by SHARP is not distributed.
Acknowledgements
The following open source software components are included in this product:
• linux kernel • busy box • glibc • zlib • libpng • libjpeg • mtd-utils • U-Boot • device-mapper
Software Copyrights
BSD License
This product includes software developed by the University of California, Berkeley and its contributors.
libjpeg
This software is copyright © 1991-1996, Thomas G. Lane.
Portions of this software are based in part on the work of the Independent JPEG Group.
Portions copyright © 2004 Intel Corporation
40LE820X_en_au.indd 69 40LE820X_en_au.indd 69
The TV displays a confi rmation screen while
6
checking the data in the inserted USB device.
CAUTION
• If the data is not compatible with the system, an error
message appears on the screen. Repeat steps 2 and 3
after pressing ENTER.
• When an error message displays, check to see if:
• The USB device is inserted fi rmly.
• The USB memory has two or more software update fi les.
• No data for updating the system exists in the USB
memory.
• The software update fi le is broken.
• The software update fi le is not compatible with your
TV's software.
• The current system is same as the system update data.
The TV displays the software version
7
information after checking the data.
Press c / d to select "Yes" to update the
8
system, and then press ENTER.
Press ENTER to automatically reset and start
9
the update operation.
• This operation may take a while.
The TV starts updating the system
A confi rmation message appears on the
screen after completing the update and then
automatically restarts the TV. Press ENTER
to complete the operation.
69
2010/06/18 16:13:04 2010/06/18 16:13:04