Preparation; Protection Against Overturning - Sharp LC-70LE735X Aquos Operation Manual

Preparation

Protection against overturning

There is a danger of the product overturning in the case of a disaster or sudden collision. Carry out the following tip-
resistant measurement for your safety.
Anchoring the TV to the wall or a pillar
1
Affix the TV to the wall or a pillar using
extra strong ties and cup hooks.
Fixing the TV to the table
1
Place the TV on the table.
2
Pull the attached restraining bracket out so that it
is at a 90 degrees angle.
3
Insert commercially available screws in the holes
of the restraining bracket and tighten the screws
to secure the TV to the table.
• Use commercially available screws to firmly secure the
TV.
CAUTION
• As this product is heavy, use a table that is wide
enough to support the product and capable of
withstanding the product's weight. The table should be
set where it will not be overturned.
• Be sure to use at least two people when moving the TV.
6
View from the top

Cup hook (commercially available)

Tie (commercially available)

Restraining bracket (attached)

Screws (commercially available)
Wall