Connecting An Ac Power Cord; Verifying The Installation - HP MSR20-1X Series Installation Manual

Figure 45 Set the terminal emulation parameters

Connecting an AC power cord

To connect the AC power cord:
Make sure the router is well grounded and the power switch of the router is in the OFF position.
1.
Connect one end of the power cord shipped with the router to the power socket on the rear panel,
2.
and the other end to an AC power source.
Figure 46 Connect the AC power cord

Verifying the installation

After installation, verify the following items before powering on the router:
Enough space is reserved around the router for heat dissipation, and the router is sturdy.
•
• Antennae, USB devices, and interface modules are correctly installed.
The router, rack, and power module are well grounded.
•
29