B-Vent Specialty Gas Fireplaces
ROCK WOOL PLACEMENT
Break up rock wool (ember material) into dime sized piec-
es. Place the pieces between metal lip and burner tube.
Maintain a 3/8" space free of ember material directly in
front of the front burner ports for best performance and
effect. Blockage of the burner ports may create increased
soot and carbon build-up. Figure xx
LG1028
Figure xx
18
Figure xx
Log #1
LG1028
bv desgnr log 1
Ember Material
Metal Lip
LG1027
bvent designer rock wool
LOG PLACEMENT
Metal Lip
LG1027
Ember Material
Valve
LOG PLACEMENT
1. Place V-notch in bottom of
Log #1 on center V section
of burner assembly. Smaller
end of log with two (2) pins
goes on same end as valve.
Figure xx
20301938