SPEED CONTROL
Figure 8.31
Remove the knob and lock nut from the speed
control. Install speed control onto access panel with stem
sticking out the pre-punched hole. Attach the lock nut tightly
and reattach the knob on the stem.
Attach blue and black wires routed through orange grommet
in fan housing to the speed control.
panel.
BLACK
TEMPERATURE SENSOR SWITCH
Figure 8.32
Page 36
LOCK NUT
AND STEM
Reinstall access
VARIABLE SPEED CONTROL
JUNCTION BOX
BLACK
GROUND
BLACK
110 - 120 VAC
POWER SUPPLY
Heat & Glo · Tiara I B & Tiara II B · 7010-149L
WHITE
GREEN
BLOWER RECEPTACLE
BLOWER
November 14, 2007