Main Burner Ignition & Usage; Main Burner Ignition; To Extinguish - Weber Spirit 320 Owner's Manual

Lp gas grill
Hide thumbs Also See for Spirit 320:
Table of Contents

Advertisement

Main Burner iGnition

Summary lighting instructions are inside the left hand cabinet door .
m danGer
failure to open the lid while igniting the barbecue's burners,
or not waiting five minutes to allow the gas to clear if the
barbecue does not light, may result in an explosive flare-up
which can cause serious bodily injury or death.
Crossover
ignition system
®
Note: The Crossover® Ignition System ignites BURNER 1 with a spark from the igniter
electrode inside the Gas Catcher™ ignition chamber. You generate the energy for the
spark by pushing the electronic ignition button. You will hear it sparking.
m warninG: Check hose before each use of barbecue for
nicks, cracking, abrasions or cuts. if the hose is found to
be damaged in any way, do not use the barbecue. replace
using only weber
authorized replacement hose. Contact
®
the Customer service representative in your area using the
contact information on our web site.
Log onto www.weber.com
A) Open the lid (1) .
B) Make sure all burner control knobs are turned OFF (2) . (Push control knob down
and turn clockwise to ensure that it is in the OFF position .)
m warninG: the burner control knobs must be in the off
position before turning on the liquid propane cylinder tank
valve. if they are not in the off position, when you turn on
the LP cylinder valve, the "excess gas flow control" feature
will activate, limiting the flow of gas from the LP cylinder. if
this should occur, turn off the LP cylinder valve and burner
control knobs. start over.
m danGer
when the "excess gas flow control" feature is activated,
a small amount of gas is still flowing to the burners. after
turning off the cylinder valve, wait at least five minutes
for the gas to clear before attempting to light the barbecue.
failure to do so may result in an explosive flare-up, which
can cause serious bodily injury or death.
C) Turn the cylinder on by slowly turning the cylinder valve counterclockwise (3) .
m warninG: do not lean over the open barbecue. Keep your
face and body at least one foot away from the matchlight
hole when lighting the barbecue.
D) Push BURNER 1 control knob down and turn to START/HI (4) .
E) Push and hold the electronic ignition button . You will hear it sparking (5) .
F) Check that the burner is lit by looking through the matchlight hole on the front of the
cooking box . You should see a flame (6) .
m warninG: if the burner does not light in five seconds, turn
the Burner 1 control knob to off and wait five minutes to
let the gas clear before you try again or try to light with a
match.
G) After BURNER 1 is lit you can turn on BURNER 2 (and BURNER 3) (7) .
Note - Always light BURNER 1 first. The other burners ignite from BURNER 1.

to eXtinGuish

Push down and turn each burner control knob clockwise to the OFF position . Turn gas
supply OFF at the source .
14
maIN bUrNEr IGNITIoN & USaGE
.
®
2
4
the grill illustrated may
have slight differences
than the model purchased.
2
OFF
APAGADO
OFF
ARRETE
APAGADO
ARRETE
4
1
6
5
5
1
1
2
7
5
4
3

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

89962

Table of Contents