Oil Check; Oil And Filter Change - Polaris RANGER XP 900 Owner's Manual

Maintenance and safety
Hide thumbs Also See for RANGER XP 900:
Table of Contents

Advertisement

Engine Oil

Oil Check

Always check the oil when the engine is cold. If the engine is hot when the oil is checked, the
level will appear to be overfull.
CAUTION! Always remove all cargo from the cargo box before lifting the box to access engine
components.
Access the oil fill cap, dipstick and filter under
the cargo box.
1. Remove all cargo from the cargo box. See
page 43.
2. Position the vehicle on a level surface.
3. Place the transmission in PARK.
4. Stop the engine.
5. Stand clear and pull up on the cargo box
release lever. Lift the front of the cargo
box.
6. Remove the dipstick. Wipe it dry with a
clean cloth.
7. Reinstall the dipstick completely. Remove
the dipstick and check the oil level.
8. Remove the oil fill cap to add the recommended oil as needed. Maintain the oil level
between the minimum and maximum marks on the dipstick. Do not overfill.
9. Reinstall the fill cap. Reinstall the dipstick.
10. Lower the cargo box and push down securely to latch.

Oil and Filter Change

Always change the oil and filter at the intervals outlined in the Periodic Maintenance Chart
beginning on page 47. Always change the oil filter whenever changing oil.
The crankcase drain plug is located on the bottom of the crankcase. Access the drain plug
through the access hole in the skid plate under the crankcase (see next page).
CAUTION! Always remove all cargo from the cargo box before lifting the box to access engine
components.
Access the oil fill cap, dipstick and filter under the cargo box.
1. Remove all cargo from the cargo box. See page 43.
2. Position the vehicle on a level surface.
MAINTENANCE
Oil Fill
Oil
Cap
Filter
Oil
Dipstick
51

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

2013 ranger xp 900

Table of Contents