Oil Check - Polaris RANGER 500 EFI 4X4 2011 Owner's Manual

Table of Contents

Advertisement

Engine Oil
Always check and change the oil at the intervals outlined in the Periodic
Maintenance Chart beginning on page 59. See page 64 for oil recom-
mendations.

Oil Check

The oil tank is located under
the seat.
1. Position the vehicle on a
level surface. Place the
transmission in PARK.
2. Start the engine and allow
it to idle for 20-30 sec-
onds. Stop the engine.
3. Remove the seat. See page
29.
4. Remove the dipstick. Wipe
it dry with a clean cloth.
5. Reinstall the dipstick.
Screw it in completely.
6. Remove the dipstick. Make
sure that the oil level is in
the safe range. Add oil if
necessary. Do not overfill.
Tip: A rising oil level between checks in cool weather driving can indicate mois-
ture collecting in the oil reservoir. If the oil level is above the full mark,
change the oil.
MAINTENANCE
Safe Range
Add
Full
65

Hide quick links:

Advertisement

Table of Contents

Troubleshooting

loading

This manual is also suitable for:

2011 ranger 500 efi crew2011 ranger 500 efi 4x4

Table of Contents