Specifications - JVC NX-PS2 Instructions Manual

Accessories
See page 3
Amplifier
Output Power
Main Speaker
Subwoofer
Terminals
AUX
Input Sensitivity/Impedance (1 kHz)
USB MEMORY
Compatible device
Compatible file system FAT16, FAT32
Bus power supply
iPod
Compatible iPod types See page 13
Bus power supply
VIDEO OUT (For iPod) Composite
Speaker terminals
PHONES
Tuner
FM tuning range
Unit
Dimensions
Mass
22

Specifications

10 W per channel, min. RMS,
driven into 6 Ω at
1 kHz, with no more than
10% total harmonic distortion
(IEC268-3)
30 W, min. RMS, driven into
8 Ω at 100 Hz, with no more
than 10% total harmonic
distortion (IEC268-3)
LEVEL1 500 mV/47 kΩ
LEVEL2 125 mV/47 kΩ
Ver. 2.0 Full Speed
Mass Storage Class
Max. 5 V/500 mA
Max. 5 V/500 mA
Main speaker 6 Ω 16 Ω
–
Subwoofer 8 Ω 16 Ω
–
32 Ω
–
1 kΩ
15 mW/ch output into
32 Ω
–
87.50 MHz 108.00 MHz
90 mm × 96 mm × 147 mm
(W/H/D)
Approx. 0.62 kg
Speaker Specifications
Main speaker SP-NXPS2F (each unit)
Type
Speaker Unit
Power handling Capacity 10 W
Impedance
Frequency Range
Sound pressure level
Dimensions
Mass
Subwoofer SP-NXPS2W
Type
Speaker Unit
Power handling Capacity 30 W
Impedance
Frequency Range
Sound pressure level
Dimensions
Mass
Power Specifications
NX-PS2 (System)
Power Requirements
Power Consumption
AC Adaptor (AA-R2401)
INPUT
OUTPUT
CA-NXPS2 (Main unit)
Power Requirements
Design and specifications are subject to change with-
out notice.
Full range bass-reflex type
7.5 cm cone × 1
6 Ω
–
150 Hz 20 kHz
83 dB/W • m
90 mm × 96 mm × 90 mm
(W/H/D)
Approx. 0.63 kg
Bass Reflex Type
16 cm cone × 1
8 Ω
–
35 Hz 150 Hz
80 dB/W • m
221 mm × 221 mm ×
222 mm (W/H/D)
Approx. 3.5 kg
–
AC 110 V 240 V
50 Hz/60 Hz
19 W (power on mode)
5 W (in Standby mode)
1 W (in ECO mode)
12 W (in Standby mode, with
iPod and USB MEMORY
connected.)
–
AC 110 V 240 V
50 Hz/60 Hz 1.5 A
DC 23 V 2.5 A,
57.5 VA
DC IN 23 V 2.5 A