Connecting Ipod; Basic Operations - JVC NX-PS2 Instructions Manual

Connecting iPod

Connect the iPod to the System using the docking station (supplied).
Make sure the System is turned off when you connect it.
How to use the docking station
1
Attach the dock adaptor to the docking station.
Dock adaptor (supplied with
iPod or separately purchased)
Docking station
for iPod
(supplied)
NOTE
• In case the connector plug of docking station is protected with cover, please remove it before
attaching the dock adaptor.
2
Connect the docking station.
Align the arrow mark on the cable plug with the arrow mark of the iPod terminal.
NOTES
• Disconnect the docking station from the System when attaching/detaching the dock adaptor.
• Be careful not to damage the terminal on the docking station when attaching/detaching the dock
adaptor.

Basic Operations

To select iPod for the source
Select iPod for the source and start playback.
• iPod can also be selected by the FUNCTION button on the main unit.
14
To detach the dock adaptor from the docking station:
Push the slot then pull up to remove the dock adaptor.
Arrow mark on the cable
plug
Arrow mark of the iPod
terminal