Using The Bluetooth Audio Player - JVC EXAD KW-AVX800 Instructions Manual

Using the Bluetooth audio player

Sound mode
( page 48)
Bluetooth icon
lights up when
the adapter is
connected.
: Buttons on the touch panel. In the
explanation, they are indicated inside
[ ].
* 1
When a cellular phone with audio function is connected, appears.
* 2
Indicates the button pressed. It may be different from the operation status.
* 3
You cannot select "New Device" when a Bluetooth audio player is connected.
~
Press [SOURCE], then press [Bluetooth
AUDIO].
( page 9)
• You can also use SOURCE on the monitor
panel. Press it repeatedly.
Ÿ
Start playback.
• See page 34 for connecting a new device.
• See pages 35 for connecting/disconnecting a
registered device.
• See page 35 for deleting a registered device.
Bluetooth Information:
If you wish to receive more information about Bluetooth, visit our JVC web site.
* 1
3 8 7
[ / ] [
4 ¢
[
5 ∞
[ ]
You can use the following buttons on the remote
controller for the Bluetooth audio operations.
40
* 2
Status of the device
Signal strength/Battery
remainder
(only when the information
comes from the device)
] Start and pause playback
] Reverse/forward search
Select the registered device
("New Device" appears when a new device can be
3
*
registered.)
: Start and pause playback.
: Reverse/forward skip.
: Adjust the volume.
page 48