Bottom Panel Features; Optimus Peripherals/Accessories For The 5100 - Honeywell Optimus 5100 User Manual

Bottom Panel Features

I/O Connector
DC Power Jack
The DC power jack receives external power from the Optimus power cable that is included with
the terminal. When connected to the Optimus power cable, the terminal is powered and the
main battery pack is charging.
I/O Connector
The I/O mechanical connector is designed to work exclusively with Optimus 5100 peripherals
and cables. This connector powers the terminal, charges the main battery, and facilitates
communication. This connector supports full speed USB 1.1 communication (up to 12 Mbps)
and RS-232 communications with a maximum speed of 115Kbps and seven baud rate
settings.
Through this connector, you can communicate with a host workstation via Microsoft
ActiveSync; see
The I/O connector supports the following signals:
Note: Signals referenced are for a DTE device.

Optimus Peripherals/Accessories for the 5100

The following items are sold separately and enhance your 5100's capabilities.
3 - 8
DC Power Jack
Connecting and Synchronizing the Terminal and Workstation
DC IN
Transmitted Data
Request To Send
USB Host +5V
USB Host D+
USB Host D-
USB Host Detect
Clear To Send
Received Data
GND
RS-232 Shutdown
USB Client D+
USB Client D-
USB Client +5V
on page 7-2.