Quick Spin Test - Maytag 27" Troubleshooting Manual

Test or Display
Press Delay and Chime together while
Clear All
displaying diagnostic codes
Diagnostic
Codes
Press Soil Level. Press 2 times for
Display
displays with only 2 character positions.
Software
Version
Press Chime
Cycle Count
Slide 5

Quick Spin Test

While in Service Mode, press Delay and Rinse&Spin key to
start a Quick Spin Test. Quick Spin test steps are as follows:
• Start spinning and after reaching a maximum spin speed,
stay at maximum spin speed for 2 minutes and stop Quick
Spin Test
Refer to Technical Data Sheet for Detailed Instructions
Quick Spin Test
While in Service Mode, press Delay and Rinse&Spin keys to start a Quick Spin Test.
Quick Spin test steps are as follows:
•
•
Press LED to Start
Press
Start spinning and after reaching a maximum spin speed.
stay at maximum spin speed for 2 minutes and stop Quick Spin Test.
Press LED to Cancel
Press Soil Level a 3
Quick Spin Test
7
rd
time