Introduction; Features; Before Installing - Q-See QD6523ZH User Manual

INTRODUCTION

This manual is written for the QD6523ZHH pan-tilt-zoom camera and was accurate
at the time it was completed. However, because of our ongoing effort to constantly
improve our products, additional features and functions may have been added
since that time and on-screen displays may change. We encourage you to visit our
website at www.Q-See.com to check for the latest product announcements. You
can also find technical details and an electronic version of this manual on our online
Knowledge base online at www.Q-See.com/support.
Throughout the manual we have highlighted warnings and other important
information that will assist you in operating your new system in a safe and trouble-
free manner. Please take the time to read and follow all instructions and pay
attention to alerts as shown below:
IMPORTANT! Red boxes with this icon indicate warnings. To
prevent possible injury or damage to the product, read all warnings
before use.
NOTE! Text in blue boxes with the Information icon offer additional
guidance and explanations about how to make the most out of your
system.
For your safety and to protect your camera
To prevent damage to your Q-See product or injury to yourself or to others, read
and understand the following safety precautions in their entirety before installing or
using this equipment.
Care should be taken during transportation, storage and installation of this camera
n
WARNING! ELECTRIC SHOCK RISK!
to avoid rough handling, dropping, or other abuse in order to prevent damage to the
optics or components inside the camera.
Camera should be installed in accordance with electrical standards including keeping
n
the camera and cable away from high voltage, using a transient voltage surge
protector (UL-1449) and using only the rated power supply.
Do not use strong or abrasive cleaners on camera body or lens. Use a damp cloth
n
for cleaning the housing and a lens cloth for the optics.
Do not attempt to disassemble the camera beyond removing the case to adjust
n
settings. Only authorized, trained technicians should service this camera.
The camera should not be immersed in water and should be mounted in a sheltered
n
location. Do not point camera directly at the sun or other strong light source.
4

FEATURES

Your camera offers the following features:
High quality video using 1/4" Sony Exview HAD CCD-II
n
Automatically recognizes Pelco-D and Pelco-P protocols
n
650 TV lines of resolution daytime, 700 TV lines or resolution at night.
n
n Weatherproof IP66 Rating
Color vision to 0.01Lux, Night (B/W) vision to 0.001Lux
n
Automatic focus and light levels with manual override
n
Vandal-proof design.
n
Heater/blower for operation down to -40° (F or C)
n
n RS485 control.
External alarm input.
n
3.9-89.7mm zoom lens
n
360° continuous horizontal rotation with 90° vertical movement.
n
Low-noise camera rotation motor.
n
n Memory function retains settings in case of power loss.
Horizontal scanning: 360° rotation
n
300°/second rotation speed, 200°/second tilt speed
n
Rotation speed can adjust based on focal length
n
PTZ scanning precision ± 0.5°
n
n 23x optical zoom, 16x digital zoom
Camera can be controlled with an optional keyboard
n

BEFORE INSTALLING

Your camera is shipped with a foam
collar inside the glass cover. This
collar protects the camera mechanism
from damage during shipping. It
must be removed and discarded
before powering up or operating the
camera in order to avoid damaging the
mechanism.
Use the included torx (star) wrench to
loosen the three retaining bolts securing
the camera cover to the housing. You
should not remove the bolts from the
cover itself. Take care to not leave
fingerprints or debris on the inside of
the clear cover, or within the camera
housing while it is open.
Remove and discard the foam housing and then reattach the cover to the housing,
making sure that the seal is tight in order to maintain the camera's weatherproofing.
If you will be changing your camera's address or making other changes using the
internal DIP switches (see next page), then you should do so before closing up the
camera.
Remove Screws (x3)
5