Rinnai RHFE-263FA Owner's Operation And Installation Manual page 6

Energysaver gas direct vent wall furnace
Hide thumbs Also See for RHFE-263FA:
Table of Contents

Advertisement

12. YOUNG CHILDREN SHOULD BE CAREFULLY SUPERVISED WHEN THEY ARE IN THE SAME
ROOM WITH THE HEATER.
13. LPG containers must not be installed indoors.
14. Do not use this room heater if any part has been under water. Immediately call a qualified service
technician to inspect the room heater and to replace any part of the control system and any gas
control which has been under water.
15. Adequate clearances for accessibility for purposes of servicing, proper operation and adequate
combustion and ventilation air should be provided.
16. Adequate clearances around air openings should be provided.
17. Do not install in areas where curtains, drapes, clothing, or other moving flammables are within 10
inches of this unit.
18. Periodic examination of the venting system is required.
19. The flow of combustion and ventilation air should not be obstructed.
20. A manufactured home (USA only) or mobile home OEM installation must conform with the
Manufactured Home Construction and Safety Standard, Title 24CFR, Part 3280, or, when such a
standard is not applicable, the Standard for Manufactured Home Installations, ANSI Z225.1 or
Standard for Gas Equipped Recreational Vehicles and Mobile Housing, CSA Z240.4.
21. "This appliance must be installed in accordance with the current standard CSA Z240.4 GAS
EQUIPPED RECREATIONAL VEHICLES AND MOBILE HOUSING. Cet appareil doit ette installe
conformement aux, exigences de la norme Z240.4 en vigeuer de l'ACNOR, Installations de gaz dans
les constructions mobiles et vehicules recreatifs."
22. If a blockage occurs at the vent terminal due to snow, ice, leaves, spider webs or other type of
obstructions, the unit will stop working. The unit will not function until the blockage has been
removed. If the unit then fails to operate, contact a qualified service agency.
23. For a manufactured home (USA only) or mobile home OEM or residential installation,this unit has been
designed and certified to be converted from natural gas to propane or vice-versa. When provisions are
being made to convert this unit, a certified conversion kit must be used. You must also readjust manifold gas
pressure to specifications indicated in the conversion manual. If in doubt, contact Rinnai America for
assistance.
24. Clothing or other flammable material should not be placed on or near the appliance.
– 4 –

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents