Fitting Unit - Rinnai RHFE-263FA Owner's Operation And Installation Manual

a
Attach the Air Inlet Hose to the flue manifold on
either inlet position a or b.
The unused inlet is plugged with the rubber cap
supplied on the manifold.
The following components can be fitted by
reaching down the rear of the appliance as it is
positioned against the wall.
Flue Manifold
Connect the flue elbow to the manifold by
moving the appliance into position.

FITTING UNIT

b
– 21 –
Pipe stopper
Manifold
Elbow
Fit the Pipe stopper over the connection
between the flue elbow and the manifold.
Engage the hook and rotate it until it snaps
against the body of the clamp.
Flue
Manifold
Fit Clip
Sock
Slide the insulation sleeve up to the flue
manifold and slip the securing clip over the
sleeve as shown.
Hook
Pipe stopper
Pipe stopper
Elbow
Slide