Table of Contents
Advertisement
4.7.1.1
Principles of operation
Water fill to pre-wash compartment
•
This version is used in models with three compartments
(EWM1000) and 3 or 4 compartments
(EWM2000EVO/EWM3000NEW). The detergent contained in
compartment "a" is introduced at the beginning of the pre-wash
phase.
•
In certain models featuring the "stains" option, compartment "a" may
be used (as an alternative) to contain the stain-removal product,
which is introduced during the wash phase.
Water fill to wash compartment
•
In all models, compartment "b" is used to contain the detergent,
which is introduced at the beginning of the wash phase.
Water fill to conditioner compartment
(pre-wash and wash solenoid valves)
•
In all models, compartment "d" is used to contain the conditioner,
which is introduced at the beginning of the final rinse.
Water fill to pre-wash and bleach compartment
In EWM1000 models with 4-compartment detergent dispensers,
water is ducted into compartments "a" and "c", though not at the
same time.
1.
f the user selects the pre-wash option, water is ducted through
compartments "a" and "c" at the beginning of the pre-wash phase.
If this option has not been selected, water is ducted through the
compartments at the beginning of the first rinse.
Water fill to bleach compartment
In EWM2000EVO/EWM3000NEW models with 4 compartments,
water is ducted through compartment "c" at the beginning of the final
rinse.
(Wash + hot water solenoid valve)
1. In models featuring the hot water solenoid valve
(EWM2000EVO/EWM3000NEW only), the wash and hot water
solenoid valves are actioned simultaneously to duct mixed water (hot
and cold) through the wash compartment.
2005.11 dmm
(Pre-wash solenoid valve)
(Washing solenoid valve)
(Pre-wash solenoid valve)
(Bleach solenoid valve)
Hot water fill
29/60
599 37 38-46
Advertisement
Table of Contents
