Related Manuals for Electrolux PW9C
Summary of Contents for Electrolux PW9C
- Page 1 Installation manual Washer extractor PW9C Type W3... 438 9217-90/EN Original instructions 2022.08.19...
-
Page 3: Table Of Contents
Contents Contents 1 Safety Precautions ..........................5 General safety information......................6 Commercial use only........................6 Symbols............................6 2 Warranty terms and exclusions......................7 3 Technical data.............................8 Drawing ............................8 Technical data ...........................9 Connections ..........................9 4 Setup ..............................9 Unpacking ..........................9 Recycling instruction for packaging ................... 11 Siting ............................12 Mechanical installation ......................12 5 Water connection ..........................13 6 Drain connection ..........................14... -
Page 5: Safety Precautions
Installation manual 1 Safety Precautions • Servicing shall be carried out only by authorized personnel. • Only authorized spare parts, accessories and consumables shall be used. • Only use detergent intended for water-wash of textiles. Never use dry cleaning agents. •... -
Page 6: General Safety Information
Installation manual person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. – This appliance is intended to be used in household and similar applications such as: (IEC 60335-2-7) staff kitchen areas in shops, offices and other working environments, farm houses, by clients in hotels, motels and other residential type environments, bed and breakfast type environments, areas for communal use in blocks of flats or in launderettes. -
Page 7: Warranty Terms And Exclusions
Warranty will be applicable where the customer has used only genuine spare parts and has performed maintenance in accordance with Electrolux Professional user and maintenance documentation made available in paper or elec- tronic format. Electrolux Professional strongly recommends using Electrolux Professional approved cleaning, rinse and descaling agents to obtain optimal results and maintain product efficiency over time. -
Page 8: Technical Data
Installation manual 3 Technical data 3.1 Drawing fig.7792 Operating panel Door opening, ⌀ 310 mm Detergent container Cold water Hot water Liquid detergent supply Drain valve Electrical connection Steam connection Re-used water 1130 1113 1030 1010... -
Page 9: Technical Data
Installation manual 3.2 Technical data Weight, net Drum volume litres Drum diameter Drum speed during wash Drum speed during extraction 1015 G-factor, max. Heating: Electricity Heating: Hot water Frequency of the dynamic force 16.9 Floor load at max extraction 1.4 ± 0.5 Sound power/pressure level at extraction* dB(A) 75/61... - Page 10 Installation manual Remove the bolts between the machine and pallet. There is one to the right in the front of the machine and another diagonally opposed to it, at the back of the machine. fig.7651 Remove the machine from the pallet. Note! When moving the machine, handle it with care.
-
Page 11: Recycling Instruction For Packaging
Installation manual 4.2 Recycling instruction for packaging fig.X02395 Fig. Description Code Type Wrapping film LDPE 4 Plastics Corner protection PS 6 Plastics Cardboard packaging PAP 20 Paper Pallet FOR 50 Wood Screw FE 40 Steel FE 40 Steel Plastic bag PET 1 Plastics... -
Page 12: Siting
Installation manual 4.3 Siting Install the machine close to a floor drain or open drain. The machine should be positioned so that there is plenty of room for working, both for the user and service personnel. The figure shows minimum distance to a wall and/or other machines. 500 mm / 25 mm / 25 mm /... -
Page 13: Water Connection
Installation manual Place the machine over the two drilled holes. The holes are at the front of the machine. Level the machine with the feet of the machine. Screw in the feet as much as possible before starting to level the ma- chine. -
Page 14: Drain Connection
Installation manual 6 Drain connection Drain valve Connect a 75 mm (alt. 50 mm) pipe or rubber hose to the machine’s drain pipe, ensuring a downward flow from the machine. Avoid sharp bends which may prevent proper draining. The drainage pipe should be located over a floor drain, drainage channel or the like so that the distance between the outlet and the drain is at least 25 mm. -
Page 15: Electrical Connection
Installation manual 7 Electrical connection 7.1 Electrical installation The electrical installation may only be carried out by qualified personnel. Machines with frequency-controlled motors can be incompatible with certain types of earth leakage circuit break- er. It is important to know that the machines are designed to provide a high level of personal safety, which is why items of external equipment such as earth leakage circuit breakers are not necessary but is recommended. -
Page 16: Machine Connection
Installation manual 7.3 Machine connection Connect the earth and other two wires as shown. Single-phase connection Three-phase connection 1NAC Electrical heated N T1 T2 T3 N T1 T2 T3 3N AC Electrical heated N T1 T2 T3 N T1 T2 T3 Non heated... -
Page 17: Converting Heating Elements
Installation manual 7.4 Converting heating elements 7.4.1 The machine can be converted from 380–415V 3AC to 220-240V 3AC Disconnect the power to the machine. Demount the front panel and remove the cover to the heating elements. Remove the blue cables. Move cables 357/BN, 356/BK and 358/GY from the red to the white terminals on each element. -
Page 18: The Machine Can Be Converted From 400-415V 3Ac To 230-240V 1Ac With Reduced Power
Installation manual 7.4.2 The machine can be converted from 400–415V 3AC to 230-240V 1AC with reduced power Disconnect the power to the machine. Demount the front panel and remove the cover to the heating elements. Remove the blue cables. Move cables 357/BN on E1 and 358/GY on E3 from the red to the white terminals on each element. Remount the cover to the heating elements and remount the cover panel. -
Page 19: At First Power Up
Installation manual 8 At first power up When the installation is complete and the power is connected for the first time you will be forced to make the following settings. When one setting is ready you will automatically enter the next one. •... -
Page 20: Disposal Information
Installation manual 10 Disposal information 10.1 Disposal of appliance at end of life Before disposing of the machine, make sure to carefully check its physical condition, and in particular any parts of the structure that can give or break during scrapping. The machine’s parts must be disposed of in a differentiated way, according to their different characteristics (e.g. - Page 24 Electrolux Professional AB 341 80 Ljungby, Sweden www.electroluxprofessional.com...