Assembly - Husqvarna 580 R, 580 RS, 580 RSE, 580 RSW, 600 C Owner's Manual

TO REMOVE UNIT FROM CARTON
1. Cut off top of carton.
2. Remove front and rear inserts and
literature pack.
1. Mower Unit
2. Discharge Chute
3. Grass Bag
4. Grass Bag Frame
5. Literature Pack
6. Battery Charger (electric start
models)

ASSEMBLY

1. Unfold and adjust handlebar.
2. Self propelled units: The Speed
Selector rod is shipped on the
handlebar with hardware in position.
Remove hair pin, insert bent end of rod
through hole in swivel of speed control
bell crank, and retain with hair pin
(Figure 5).
3. Assemble grass bag onto bag frame.
4. Configure mower for bagging, side
discharge or mulching. See Mower
Configurations in Operation Section.
5. Fully charge battery (electric start
models). See Service & Adjustments .
6. Check the Engine/Blade Control
feature. Engine and blade must stop
within 3 seconds whenever control
handlebar is released.
7. Fill fuel tank. See Operation Section.
ASSEMBLY
1
3. Cut out back of carton and roll unit out.
4. Remove protective packaging
materials.
5
L i t
OM0311
4
Figure 4
1
3
2
1. Speed Selector Rod
2. Hair pin
3. Speed Control Bell Crank
GB - 9
2
OM0340
e r
a t u
P a
r e
c k
OM0350
6
OM0330
Self propelled units
Figure 5
3
OM0320
OM0560
OM0300