Changing The Set Speed; Canceling The Set Speed; Resuming The Set Speed; Switching Cruise Control Off - Ford EXPLORER 2013 Owner's Manual

258

Changing the Set Speed

Note: If you accelerate by pressing the accelerator pedal, the set speed
will not change. When you release the accelerator pedal, you will return
to the speed that you previously set.
• Press SET up or down and hold to increase or decrease the set speed.
Release the control when you reach the desired speed.
• Press SET up or down and release. The set speed will change in
approximately 1 mph (2 km/h) increments.
• Press the accelerator pedal or brake pedal until you reach the desired
speed. Press SET up and release.

Canceling the Set Speed

Press CNCL or tap the brake pedal. The set speed will not be erased.

Resuming the Set Speed

Press and release RES.

Switching Cruise Control Off

Note: The set speed is erased when you switch off cruise control.
Press the OFF control down and release or turn off the ignition.
USING ADAPTIVE CRUISE CONTROL (IF EQUIPPED)
WARNING: Always pay close attention to changing road
conditions, especially when using adaptive cruise control.
Adaptive cruise control cannot replace attentive driving. Failing to
follow any of the warnings below or failing to pay attention to the road
may result in a collision, serious injury or death.
WARNING: Adaptive cruise control is not a collision warning or
avoidance system. Additionally, adaptive cruise control will not
detect:
• stationary or slow moving vehicles below 6 mph (10 km/h)
• pedestrians or objects in the roadway
• oncoming vehicles in the same lane.
2013 Explorer (exp)
Owners Guide gf, 4th Printing, November 2012
USA (fus)
Cruise Control