[Af Assist Lamp]; [Red-Eye Removal]; [Stabilizer]; [Date Stamp] - Panasonic Lumix DMC-ZS9 Owner's Manual

Using the [Rec] menu

[AF Assist Lamp]

Illuminates lamp when dark to facilitate focus alignment.
■
Recording Mode:
■
Settings: [ON] : Lamp illuminated with halfway press of shutter
button ( and larger AF area displayed)
[OFF] : Lamp off (taking pictures of animals in dark, etc.)
●
The AF Assist Lamp has an effective distance of 1.5 m (4.92 feet).
• Do not block the lamp with your fingers or look at it from close
range.
●
The setting is fixed to [OFF] in the following Scene Modes.
[Self Portrait], [Scenery], [Night Scenery], [Sunset], [Fireworks],
[Aerial Photo], [Underwater]

[Red-Eye Removal]

Automatically detects red-eye and corrects still picture data when recording with flash
Red-Eye Reduction (
■
Recording Mode:
■
Settings: [ON]/[OFF]
●
This setting will work only when [AF Mode] is
●
The red-eye effect may not be corrected under certain conditions.
●
When the function setting is [ON], a
Automatically detects and prevents jitter.
■
Recording Mode:
■
Settings: [ON]/[OFF]
●
Setting fixed to [ON] in [Self Portrait] and [OFF] in [Starry Sky] Scene Modes.
●
Cases where Optical Image Stabilizer may be ineffective:
Heavy jitter, high zoom ratio (also in the Digital Zoom range), fast-moving objects,
indoors or in dark locations (due to low shutter speed)
●
This is fixed at [ON] during motion picture recording.
80
VQT3H43
(Continued)
).
(Face Detection).
appears with the flash icon.

[Stabilizer]

For [Rec] menu setting procedures (→17)
Still pictures can be taken with the recording date and time stamped on the still picture.
■
Recording Mode:
■
Settings: [W/O TIME]/[WITH TIME]/[OFF]
●
Date stamps on still pictures cannot be erased.
●
The date is not stamped when [Burst] is set or when [Panorama Assist], [Hi-Speed
Burst] or [Flash Burst] Scene Modes is set.
●
Do not request date printing in store or make date printing on printer for still pictures
with date stamps. (Date printing may be overlapping.)
AF Assist Lamp
Set the clock. Same function as that in [Setup] menu.

[Date Stamp]

[Clock Set]

81
VQT3H43