[Cust.set Mem.]; [Lcd Mode]; [Guide Line]; [Histogram] - Panasonic Lumix DMC-ZS9 Owner's Manual

Using the [Setup] menu
Item
[C1] / [C2] / [C3]

[Cust.Set Mem.]

Register settings on
current camera. (→51)
[Auto Power LCD]:
The brightness is adjusted automatically depending on

[LCD Mode]

how bright it is around the camera.
Make LCD monitor easier
to see. [Power LCD]:
Makes screen brighter than normal (for outdoor use).
[High Angle]:
Makes screen easier to see when taking pictures from
high positions. (becomes harder to see from the front)
[OFF]
• [Auto Power LCD] does not work in Playback Mode.
• [Power LCD] returns to ordinary brightness if there is no
operation for 30 seconds when recording. (Press any
button to make brighter again).
• [High Angle] will be canceled when power is turned off.
• Because the picture shown on the LCD monitor screen
emphasizes brightness, some subjects may look different
than their actual appearance, but this will not affect the
recorded picture.
• Setting [LCD Mode] will reduce the number of pictures
that can be recorded and recording time.
[Rec. Info.]

[Guide Line]

[ON] (Display recording information with guide lines.)
[OFF]
Select recording
information display and
[Pattern]
types of guidelines. (→39)
/
[ON]/[OFF]

[Histogram]

Check subject brightness
on graph. (→39)
20
VQT3H43
(Continued)
Settings, notes
: Change the patterns of guide lines.
For details about the setting procedure in the [Setup] menu (→17)
Item
[ON]/[OFF]

[Zoom Resume]

• Cannot be set when using [Self Portrait] Scene Mode.
Remember the zoom
position when turning the
power off.
[Sleep Mode]

[Economy]

[2 MIN.]/[5 MIN.]/[10MIN.]/[OFF]:
Automatically shut off power while not in use.
Turn off the power or
• To restore → Press the shutter button halfway, or turn on
make the LCD monitor
go dark while not using
• Cannot be used in the following cases:
the camera to minimize
When using AC adaptor (optional) and DC coupler
battery consumption.
(optional), when connected to computer/printer, during
motion picture recording/playback, during Slide Shows,
during automatic demo playback
• Settings fixed to [5 MIN.] in [Intelligent Auto] Mode.
[LCD Power Save]
[ON]/[OFF]:
The LCD monitor goes dark to minimize power
consumption.
• Reduces the picture quality of the LCD monitor display
during recording to minimize battery consumption
(except for the Digital Zoom area). Note, however, that
there is no effect on the recorded picture.
• The setting in [LCD Mode] is prioritized over the setting
in [LCD Power Save] for the brightness of the LCD
monitor.
[1 SEC.]/[2 SEC.]

[Auto Review]

[HOLD]: Auto review screen remains until a button (other
Automatically display
[OFF]
still pictures immediately
after taking them. • Fixed to [2 SEC.] in [Intelligent Auto] Mode.
• In [Panorama Assist], [Hi-Speed Burst], [Flash Burst],
and [Photo Frame] Scene Modes, or in [Auto Bracket],
and [Burst] Modes, Auto Review is performed regardless
of setting.
• Motion pictures cannot be automatically reviewed.
Settings, notes
the power again.
than the [DISP.] button) is pressed
VQT3H43
21