[No.reset]; [Reset]; [Output]; [Rotate Disp.] - Panasonic Lumix DMC-ZS9 Owner's Manual

Using the [Setup] menu
Item
• The folder number is updated and the file number starts
from 0001.

[No.Reset]

• A folder number between 100 and 999 can be assigned.
Reset picture file
Numbers cannot be reset once folder number reaches
numbers.
999. In this case, save all necessary pictures to your
computer, and format the built-in memory/card (→23).
• To reset folder number to 100:
First, format the built-in memory or card, and reset the
file numbers using [No.Reset]. Then, select [Yes] on the
folder number reset screen.
[Reset Rec. settings?]

[Reset]

[Reset setup parameters?]
Reset to the default
• Information registered in [Face Recog.] is reset if
settings.
recording settings are reset.
• Resetting the setup parameters will also reset the
following.
Age in years/months and names in [Baby] and [Pet]
Scene Modes.
• Folder numbers and clock settings will remain
unchanged.
• Camera movement may be audible as the lens function
is reset. This is normal.
[Select on connection]:
Select [PC] or [PictBridge(PTP)] each time you connect to
[USB Mode]
a computer or PictBridge-compatible printer.
Select communication
[PictBridge(PTP)]: Select when connecting to a
method for when
connecting camera to a
computer or printer with
[PC]: Select when connecting to a computer.
USB connection cable.
22
VQT3H43
(Continued)
Settings, notes
PictBridge-compatible printer.
For details about the setting procedure in the [Setup] menu (→17)
Item
[Video Out] (DMC-ZS8PU/DMC-TZ18PR only.)

[Output]

[NTSC]/[PAL]
• Change the video output format when connected to a TV,
Operates when AV cable
etc. (Playback Mode only).
is connected.
[TV Aspect]
/
: Rotate Display is turned on.

[Rotate Disp.]

: Rotate Display is turned on for TV output only.
Automatically rotate
[OFF]
portrait still pictures.
• [Rotate Disp.] cannot be used with motion pictures.
• Still pictures taken with the lens surface facing up or down,
or still pictures taken on other cameras may not rotate.
• Pictures cannot be rotated during Multi Playback.
• Will only be displayed rotated on computer if in Exif-
compatible (→37) environment (OS, software).
Current version is displayed.

[Version Disp.]

Check the version of the
camera firmware.
• This requires a sufficiently charged battery, or an AC
adaptor (optional) and DC coupler (optional). When

[Format]

formatting the built-in memory, remove the cards.
Use when [Built-In
(Only inserted card will be formatted if present; built-in
Memory Error] or
memory will be formatted if no card is inserted.)
[Memory Card Error]
• Always format cards with this camera.
appears, or when
• All protected pictures and other picture data will be
formatting the built-in
deleted.
memory or card.
• Do not turn off power or perform other operations during
formatting.
When a card/built-in
• Formatting the built-in memory may take several
memory is formatted,
minutes.
the data cannot be
• Consult your nearest Service Center if format cannot be
restored. Check the
successfully completed.
content of the card/
built-in memory
carefully before
formatting.
Settings, notes
23
VQT3H43