Saving Commonly Used Scenes; [My Scene Mode]; Vqt3H43 - Panasonic Lumix DMC-ZS9 Owner's Manual

Saving commonly used scenes

[My Scene Mode]

Recording Mode:
You can register a commonly used Scene Mode in
After the settings are made, pictures can be taken in the preset Scene Mode by simply
setting the mode dial to .
[MENU/SET]
■
Taking pictures in
registered Scene Modes
Set the mode dial to / ,
and take a picture.
■
Changing registered Scene
Modes
Perform the registration operation
again
●
and
Both represent the same function. Frequently-used scenes can be preset to each
position so that you can quickly and easily switch to the desired Scene Mode.
●
If recording settings are reset by [Reset] in the [Setup] menu, the preset Scene Modes
are cleared.
60

VQT3H43

on the mode dial.
Set to /
If you have already registered in My
Scene Mode, it is displayed as a
registered scene.
Select and set the scene
When the scene menu is not displayed (→17)
Taking motion pictures
Recording Mode:
Playing back motion pictures (→86)
This records motion pictures with audio. (Sound recording is monaural ∗
Zoom can also be used during recording.
∗
1 DMC-ZS8/DMC-TZ18
∗
2 DMC-ZS9
Microphone
(Do not cover with
your finger)
The illustration shows the DMC-ZS8/
DMC-TZ18.
Remaining recording time (approx.)
Elapsed recording time
●
Depending on the type of card used, a card-access display may appear for a while after motion
picture recording. This is not a fault.
●
Easy zoom cannot be used while recording a motion picture.
●
The following functions are not available.
Extended Optical Zoom, flash, [Face Recog.] and [Rotate Disp.] for still pictures taken vertically.
●
In [AF Mode], (23-area-focusing) is fixed:
●
In [Stabilizer], [ON] is fixed.
●
When there is no space left to store the motion picture, recording automatically ends. Additionally,
recording in progress may be stopped, depending on the card used.
●
Depending on the motion picture recording environment, static electricity or electromagnetic waves
may cause the screen to go black momentary or noise to be recorded.
[Motion Picture] Mode
or stereo ∗
1
Set the mode dial to
Start recording
Press halfway Press fully
(adjust the focus) (start recording)
You can also use zoom while recording motion
pictures.
• Immediately release the shutter button after
pressing it all the way.
• The zoom speed will be slower than normal.
• When using zoom while recording motion
pictures, it may take some time to focus.
End recording
Press fully
VQT3H43
.)
2
61