Sapido GR-1102 User Manual page 81

1. IP Address
Input your IP Address supplied by ISP. If you don't know, please check with your ISP.
2. Subnet Mask
Input Subnet Mask, normally it is 255.255.255.0.
3. Server IP Address
Input your Server IP Address supplied by ISP. If you don't know, please check with your
ISP.
4. User Name
Input the PPTP Account supplied by ISP, for example. If you don't know, please check
with your ISP.
5. Password
Input the Password supplied by ISP.
6. MTU Size
MTU stands for Maximum Transmission Unit. For PPPoE connection, the default MTU
should be provided by computer operating systems (OS). Advanced users can set the
MTU manually for increasing the internet performance. The largest number allowed is
1460 byte
7. Request MPPE Encryption
Microsoft Point-to-Point Encryption (MPPE) encrypts data in Point-to-Point Protocol
(PPP)-based dial-up connections or Point-to-Point Tunneling Protocol (PPTP) virtual
private network (VPN) connections. 128-bit key (strong), 56-bit key, and 40-bit key
(standard) MPPE encryption schemes are supported. MPPE provides data security for
the PPTP connection that is between the VPN client and the VPN server.
8. DNS
If ISP provides you DNS information, please select Attain DNS automatically, otherwise
select Set DNS Manually and input the DNS information into the blank.
9. 3.5G Backup
The default interval between the two connection detection is 3 minutes, and the range is
from 1 to 60 minutes. Once Internet connection is disconnected, the system automatically
connects Internet via 3.5G adapter. If 3.5G signal is not available, it starts to search
http://www.sapido.com.tw 81 User's Manual V1.0