Sapido GR-1102 User Manual page 78

1. User Name
Input your user name supplied by ISP. If you don't know, please check with your ISP.
2. Password
Input your Password supplied by ISP.
3. Service Name
Input the service name supplied by ISP.
4. Connection Type
It has three types: Continuous, Connect on Demand, and Manual.
5. Idle Time
It is the time of inactivity before disconnecting your PPPoE session. Enter an Idle Time (in
minutes) to define a maximum period of time for which the Internet connect is maintained
during inactivity. If the connection is inactive for longer than the defined Idle Time, then
the connection will be dropped. Either set this to zero or enable Auto-reconnect to disable
this feature.
6. MTU Size
MTU stands for Maximum Transmission Unit. For PPPoE connection, the default MTU
should be provided by computer operating systems (OS). Advanced users can set the
MTU manually for increasing the internet performance. The largest number allowed by
Ethernet at the network layer is 1492 byte
7. DNS
If ISP provides you DNS information, please select Attain DNS automatically, otherwise
select Set DNS Manually and input the DNS information into the blank.
8. 3.5G Backup
The default interval between the two connection detection is 3 minutes, and the range is
from 1 to 60 minutes. Once Internet connection is disconnected, the system automatically
connects Internet via 3.5G adapter. If 3.5G signal is not available, it starts to search
downward for 3/2.75/2.5G signals until none existed. User needs manual switch through
the GUI setting page to recover the original connection.
9. Clone MAC Address
Copy the MAC address from the device you had registered to your ISP if your ISP asks
http://www.sapido.com.tw 78 User's Manual V1.0