Orion PNVR508 8CH User Manual page 91

User's Manual PNVR500 series
Alarm Sensor
You can configure the settings of the alarm sensor and
specify the operation of the sensor if an event occurs.
When done, click <APPLY > to apply the changes.
! For more information about each of the alarm sensor
actions, refer to "Alarm Sensor".
Motion Sensor
You can set an action to execute when a motion is
detected.
When done, click <APPLY > to apply the changes.
For more information about how to set the motion
sensor, refer to "Motion Sensor".
Video Loss
You can set to trigger alarm output or other actions when
there is no video transfer from a camera.
When done, click <APPLY > to apply the changes.
! For more information about how to set the video loss,
refer to "Video Loss".
System Event
You can set event actions for disk, recording, network and
system events. As same to setting event actions for
normal events, you can set to trigger alarm output,
buzzer, display on-screen pop-up, or send event
notification via email and FTP.
When done, click <APPLY > to apply the changes.
! For more information about how to set the system
event, refer to "System Event".
91