Orion PNVR508 8CH User Manual page 30

User's Manual PNVR500 series
Click <PROPERTY> and change to a desired setting of
the PTZ camera (for auto focus, auto IRIS, pan/tilt speed,
zoom speed, focusing speed, iris speed).
! Depending on the PTZ camera manufacturer and model,
some of the PTZ properties may not be applicable.
CH : Selects the PTZ camera connected to the NVR.
> PRESET (No. / Name) : You can select the
preset number and name.
! Up to 255 presets can be selected for a PTZ camera,
while up to 16 presets can be registered to one NVR.
Control the Camera's PTZ while watching the video. Press the <Set> button to append the preset.
Click the shortcut icon to move to the corresponding PTZ (preset) position.
Click Delete icon to delete the corresponding preset.
! PRESET: Memorizes the PTZ camera's framing for direct access at a later time.
SCAN/TOUR
1. Select <Scan> and click the <on> button.
2. Click the < > icon
3. Select a user-defined preset and register it.
! DWELL : Sets the dwell time of 00 seconds before
moving to the next preset location.
<SCAN> function patrols two preset positions at the
specified speed and interval for back-and-forth
monitoring.
4. Select <TOUR> and click the <ON> button.
5. Click the < > icon.
6. Select a user-defined preset and register it.
! DWELL: Sets the dwell time of 00 seconds before
moving to the next preset location.
<TOUR> function patrols multiple presets in order
(PRESET1 ; PRESET 2 ; PRESET 3 ;...) for automated
patrolling monitoring.
30