Table of Contents
Advertisement
User's Manual PNVR500 series
Auto sequence
Click the Sequence button in the status bar, or press the
[SeQ] button on the remote control to perform the
specified sequence mode.
You can configure the sequence settings in <SeQUence>.
For details, refer to "Sequence".
Controlling PTZ
You can control PTZ cameras connected to each channel.
Use the mouse to click PTZ button on the status bar, or
press the [PTZ] button of the remote control to initiate
the predefined sequence.
In PTZ mode, use buttons on the screen to control PTZ or
use [ZOOM], [FOCUS] and [PRESET] buttons of the
remote control.
Pan/Tilt control
Use mouse to rotate the PTZ camera in the direction of
up/down/left/right and diagonal directions.
You can control Pan/Tilt with [▲▼►◄] buttons of the
remote control
Zoom / Focus Control
You can control the PTZ camera for zooming and focus
adjustment.
Click <ONE PUSH FOCUS> button to adjust the
camera's focus automatically.
If the connected camera supports manual iris adjustment,
you can adjust the iris setting.
You can control by using [ZOOM] and [FOCUS] buttons
of the remote control.
29
Advertisement
Table of Contents
