Orion PNVR508 8CH User Manual page 14

User's Manual PNVR500 series
4. Once the HDD bracket is separated
from the main unit, remove 4 screws
on both ends of HDD bracket to
separate the HDD from the bracket.
5. Install a new HDD and fasten 4 screws
back to both ends of the bracket to fix
it.
! When installing HDD, make sure to
install in the correct direction.
6. Push the bracket installed with new
HDD back into the main unit until it is
completely inserted.
7. Assemble the front panel back to the
unit.
! When assembling the front panel to
the main unit, make sure the marked
part is tightly attached.
8. Fasten 2 screws on both ends of the
main unit.
14