Fault Symptom - Husqvarna AUTOMOWER 260 ACX Operator's Manual

9.2 Fault symptom

If your Automower does not work correctly, follow the trouble shooting guide below. If the fault persists;
®
contact your dealer.
Symptom
Uneven mowing
results
Automower runs at
®
the wrong time
Automower vibrates
®
Automower runs, but
®
the blade disc does
not rotate
The mower mows for
shorter periods than
usual between
charges
Both the mowing and
charging times are
shorter than usual
Automower ® starts
mowing directly
outside of the
charging station
instead of following
the loop out
68 - English
9. TROUBLE SHOOTING
Cause
Automower works too few hours per
®
day.
Working area too large.
Dull blades.
Long grass in relation to the set cutting
height.
The mower seems to work more at the
top of a slope than at the bottom.
Accumulation of grass by the blade
disc or around the motor shaft.
The clock on Automower
set.
The start and stop times for mowing
are incorrect.
Unbalanced blade disc or damaged
blades.
Automower is looking for the charging
®
station.
Grass or a foreign object is blocking
the blade disc or skid plate.
This behaviour is normal in high
temperatures (gradually increasing
above 25 °C).
Action
Increase the mowing time, see 6.4
Timer (2) on page 43.
Try limiting the working area or
extending the working time, see 6.4
Timer (2) on page 43.
Replace all the blades and screws so
that the rotating parts are balanced.
Increase the cutting height and then
successively lower.
Change the Garden shape (3-3)
setting to Open.
Check that the skid plate and blade
disc rotate easily. If not, the skid plate
and perhaps the blade disc must be
removed and the grass and foreign
objects removed. See 8.5 Cleaning on
page 63.
needs to be Set the clock, see Time and date (4-3)
®
on page 54.
Adjust the start and stop time settings
for mowing, see 6.4 Timer (2) on
page 43.
Inspect the blades and screws and
replace them if necessary.
No action. The blade disc does not
rotate when the mower is searching for
the charging station.
Dismantle and clean the skid plate and
blade disc.
No action.
Change corridor width and/or
reversing distance.