Husqvarna AUTOMOWER 260 ACX Operator's Manual page 54

• Alarm (4-1-3)
This function means that the first digit of the PIN
code must be entered within 10 seconds after
the STOP -button has been pressed or the
mower has been lifted up for any reason. If the
correct number is not entered after three
attempts, the alarm sounds. The alarm can then
be stopped by entering the complete PIN code.
IMPORTANT INFORMATION
The alarm can be activated on the mower
using the Alarm function. It is recommended
that this function is used.
To:
• Activate: Move the cursor to Alarm and press
YES . Select ON to activate and press YES .
Then specify for how long the alarm should
sound, by answer the question Duration of
alarm?.
• Deactivate: Move the cursor to Alarm and press
YES . Select OFF to deactivate and press YES .
When you select OFF , the alarm function is also
deactivated.
• SMS (4-1-4)
The SMS function enables the mower to
communicate with its user. When the mower
needs assistance for any reason, it sends an
SMS message to your mobile phone.
To:
• Set the phone number: Set the marker to
Phone number and press YES . Enter your
mobile phone number including country code
in one sequence (e.g. +46(0)123456789) and
confirm with YES .
• Activate/deactivate sending of SMS in
conjunction with a fault message or alarm: Set
the marker to SMS at fault/alarm and press
YES . Then select YES to activate or NO to
deactivate sending of SMS.
• Activate/deactivate time-controlled sending of
SMS: Set the marker to Periodical SMS and
press YES .
Select YES to activate time-controlled sending
of SMS, confirm with YES . Then set how often
the mower should send SMS messages
concerning its status by entering the time
interval in hours (e.g. 4 h to send an SMS once
every four hours).
Select NO to deactivate time-controlled sending
of SMS.
6. MENU FUNCTIONS
PIN code
Time lock
Alarm
SMS
4-1-3
PIN code
Time lock
Alarm
SMS
4-1-4
_ _ _min
ON
OFF
Phone number
SMS at fault/alarm
Periodical SMS
SIM PIN
SMS test
English - 53