Husqvarna AUTOMOWER 260 ACX Operator's Manual page 21

Best position for the boundary wire
The boundary wire should be laid so it:
• Forms a loop around the working area for
Automower . Only an original boundary wire must
®
be used. This is tinned and has a high quality
insulation to withstand the dampness in the
ground.
• Maintains a maximum distance of 35 metres from
Automower in the entire working area.
®
• Ideally not longer than 500 metres. For
installations that need a longer boundary wire, up
to 800 metres, a Signal Amplifier (522 42 58-01),
which is available as an accessory, is
recommended.
• The boundary wire is laid at different distances
from obstacles depending on what the working
area borders. The picture below shows how the
boundary wire should be routed around the
working area and around obstacles.
20 - English
3. INSTALLATION