Advertisement
Model:
TD-95-38-LT
STANDARD FEATURES
DESIGN
•
True's refrigerated horizontal bottle
coolers are designed with enduring
quality and value. Our commitment to
using the highest quality materials and
oversized refrigeration assures colder
product temperatures and years of
trouble free service.
REFRIGERATION SYSTEM
•
Factory engineered, self-contained,
capillary tube system using
environmentally friendly (CFC free)
404A refrigerant.
•
Extra large evaporator coil balanced
with higher horsepower compressor
and large condenser.
•
Maintains 20°F (-6.6°C) for applications
with high ambient temperatures.
Designed for full alcoholic beverages
only. Note; some low alcohol products
freeze below 32°F (0°C).
•
Sealed, cast iron, self-lubricating
evaporator fan motor(s) and larger fan
blades give True bottle coolers a more
efficient low velocity, high volume
airflow design. This unique design
ensures colder standard temperatures
and faster recovery in high use
situations.
•
Condensing unit accessed from
behind front grill, slides out for easy
maintenance.
PLAN VIEW
WARRANTY
Three year warranty on all parts
and labor and an additional 2
year warranty on compressor.
(U.S.A. only)
2001 East Terra Lane • O'Fallon, Missouri 63366-4434 • (636)240-2400 • Fax (636)272-2408 • Toll Free (800)325-6152 • Intl. Fax# (001)636-272-7546 • www.truemfg.com
Underbar Refrigeration:
Solid Slide Lid Deep Well Low Temp Horizontal
Bottle Cooler
•
Forced-air cooling. Positively guided
air flow cools bottles on top first.
Evaporator coil virtually runs length
of cooler for balanced temperatures
throughout the cabinet.
•
Automatic defrost system time-
initiated, time-terminated.
CABINET CONSTRUCTION
•
Exterior - all stainless steel countertop
and lid(s), heavy duty, wear resistant
laminated black vinyl front and sides,
matching black aluminum back.
•
Interior - long lasting, heavy duty
galvanized steel.
•
Insulation - entire cabinet structure
is foamed-in-place using Ecomate. A
high density, polyurethane insulation
that has zero ozone depletion potential
(ODP) and zero global warming
potential (GWP).
•
Welded, heavy duty steel frame rail,
black powder coated for corrosion
protection.
•
Removable, bottle cap opener(s) and
cap catcher(s).
BIN DIVIDERS
•
Seven (7) heavy duty, 10 mil thick
pure grade PVC coated adjustable bin
dividers to maximize storage.
METRIC DIMENSIONS ROUNDED UP TO THE
NEAREST WHOLE MILLIMETER
SPECIFICATIONS SUBJECT TO CHANGE
WITHOUT NOTICE
TRUE FOOD SERVICE EQUIPMENT
MODEL FEATURES
•
Evaporator is epoxy coated to eliminate
the potential of corrosion.
•
Barrel locks standard.
ELECTRICAL
•
Unit completely pre-wired at factory
and ready for final connection to a
115/60/1 phase, 15 amp dedicated
outlet. Cord and plug set included.
OPTIONAL FEATURES/ACCESSORIES
Upcharge and lead times may apply.
❑ 6" (153 mm) standard legs.
❑ 6" (153 mm) seismic/flanged legs.
❑ 2 1/2" (64 mm) diameter rail castors.
❑ 3" (77 mm) diameter rail castors.
❑ Ratchet locks and handles. Requires
one per lid.
❑ Remote cabinets (condensing unit
supplied by others; system comes
standard with 404A expansion valve
and requires R404A refrigerant).
Consult factory technical service
department for BTU information.
All remote units must be hard wired
during installation.
Model
Elevation Right
KCL
TD-95-38-LT
TFKY01E TFKY01S TFKY01P TFKY013
Plan
3D
Back
Advertisement
