Unlocking Programs Temporarily; Using The Input Lock Feature; Using The Control Panel Lock Feature - Toshiba 40E200U1 Owner's Manual

Unlocking programs temporarily
Using the GameTimer®
If you try to tune the TV to a program that exceeds
the rating limits you set, the TV will enter program
lock mode and the following message will appear on-
screen:
This program exceeds the rating limit you set
Push 'MUTE' to enter PIN.
You can either temporarily unlock the program or
select an unlocked program to watch.
To temporarily unlock the program:
1
Press
I
MUTE
I.
2
Enter your four-digit PIN code and press
8.
If
the correct code is entered, the program lock mode
is released and the normal picture appears. All
locking is disabled until the TV is turned off, and
will be enabled when the TV is turned on again.
You can use the GameTimer to set a time limit for
playing a video game (30-120 minutes). When the
GameTimer expires, the TV enters Input Lock mode
and locks out the input source for the video game
device.
To set the GameTimer®:
1
From the
Locks
menu, press'" to display the PIN
code entering screen.
2
Enter your four-digit PIN code and press
8.
3
Press'" to highlight
GameTimer
and press ~ to
select the length of time until the Input Lock is
activated (30, 60, 90, or 120 minutes).
To cancel the GameTimer®:
Select
Off
in step 3 above.
4
EXIT
Press
o.
Using the input lock feature
You can use the Input Lock feature to lock the video
inputs
(VIDEO 1, VIDEO
2,
ColorStream HO, HOMI1,
HOMI
2,
HOMI 3, HOMI
4, and
PC)
and channels 3 and
4. You will not be able to view the input sources or
channels until you unlock the inputs.
To lock/unlock the video inputs:
1
From the
Locks
menu, Press'" to display the PIN
code entering screen.
2
Enter your four-digit PIN code and press
8.
3
Press'" to highlight
Input Lock
and press ~ to
select the level of video input locking you prefer,
as described below.
Note:
• A message will appear when 10 minutes,
3 minutes, and 1 minute remain on the
GameTimer.
• If the TV loses power with time remaining on the
GameTimer, when power is restored the TV will
enter Input Lock mode (as
if
the GameTimer
had been activated) and you will have to
deactivate the Input Lock (as described
before).
To deactivate the Input Lock once the
GameTimer® has activated it:
Set the
Input Lock
to
Off
(I@'
"Using the input lock
feature" as described).
You can lock the control panel to prevent your
settings from being changed accidentally (by
children, for example). When the control panel lock
is
On,
none of the controls on the TV control panel
will operate except
POWER.
To lock the control panel:
1
Press
M~U
and highlight the
Locks
menu icon.
2
Press'" to display the PIN code entering screen.
3
Enter your four-digit PIN code and press
8.
4
Press'" to highlight
Control Panel Lock.
Using the control panel lock feature
Locks VIDEO I, VIDEO 2, ColorStream
HD, HOMI I, HOMI 2, HOMI 3, HOMI
4, PC and channels 3 and 4.
• Select
Video+
if you play video tapes
via an ANT/CABLE input.
Unlocks all video inputs and channels 3
and 4.
Locks VIDEO I, VIDEO 2,
ColorStream HD, HDMI I, HDMI 2,
HOMI 3, HOMI4, and Pc.
Video+
Video
Off
(continued)
43
I