Skoda Octavia Owner's Manual page 196

Changing the bulb for the main beam
ä
First read and observe the introductory information and safety warn-
ings on page 191.
›
Remove the head light » page 192.
›
Remove the rubber cover » Fig. 160
3
›
Remove connector » Fig. 163.
A
›
Press the circlip in the direction of the head lamp and then unhook to the
B
side.
›
Remove the light bulb and insert a new light bulb in such a way that the fix-
C
ing lugs of the light bulb socket fit into the recesses at the reflector.
Installation is carried out in the reverse order.
Fog lights and daytime running lights
Fig. 164 Front bumper: Protective grille/removing the fog light
194
Do-it-yourself
Fig. 163
Removing the bulb for the main
beam
on page 192.
ä
First read and observe the introductory information and safety warn-
ings on page 191.
Bulb arrangement » Fig. 164.
- Bulb for daytime running light
B
- Light bulb for fog lights
C
Removing the cap
›
Insert your fingers into opening
›
By pulling in the direction of arrow
area on the side facing the fog light.
›
Afterwards, undo the cover in the direction of arrow
remove.
Replacing light bulbs for fog lights/daytime running lights
›
Insert your hand into the opening left by the cap and press the lug
in the direction of the arrow.
›
Remove the front fog lamp.
›
Turn the connector with the bulb in counter-clockwise up to the stop and re-
move.
›
Replace the lamp, insert the connector with the new bulb and turn clockwise
up to the stop.
›
To re-install the fog light, first of all place the fog light with the lug on the side
opposite the licence plate.
›
Ð
Press in the fog lamp on the side closest to the licence plate.
›
In order to reinstall the cap, first of all insert it starting on the side facing the
marking. Then press the cap on the side closest to the fog light. The cap must
engage firmly.
» Fig. 164.
A
, first of all undo the cover in the upper
1
on the other side too,
2
D
» Fig. 164
Ð