Lubrication Of Front Wheel Bearings - Husqvarna 13 Operator's Manual

Lubrication Rider 11 and Rider 11 Bio

Lubrication of front wheel bearings

On Riders with rear ejection the hood and wings
must be removed so that the bar can be raised to
allow removal of the wheel.
1. Remove the plastic cover on the hub.
2. Remove the lock-ring and washer on the front
wheel axle.
3. Lift off the wheel.
4. Grease the axle journal with molybdenum
sulphide grease*.
5. Assemble the parts in the reverse order.
IMPORTANT INFORMATION
Check that the lock-ring is correctly
positioned in the slot.
* Grease from well-known brand names (petrol
companies, etc.) usually maintains a good quality.
The most important property is that the grease
provides good protection against corrosion.
LUBRICATION
6008-030y
39
English –