Seat Positioning - Vision Fitness E3600HRT Owner's Manual

SEAT ADJUSTMENT E3600HRT
Your E3600HRT comes equipped
with a ratcheting seat post for easy
adjustment. To raise your seat,
loosen the adjustment knob by
turning two half turns in a
counterclockwise direction. Place
your hand under the rear of the
seat and lift to the desired setting.
Tighten the adjustment knob two
half turns in a clockwise direction.
Before sitting on the seat, push
down on the seat to make sure it
does not slip and is secure.
To lower the seat, loosen the adjustment knob by turning two half turns in
a counterclockwise direction. Place one hand under the rear of the seat,
and pull the seat pin out with the other hand. Lower the seat to its desired
location. Release seat pin so the pin inserts into a hole in the seat post.
Push down on the seat to make sure it is secure. Tighten the adjustment
knob two half turns in a clockwise direction.

SEAT POSITIONING

To determine proper seat position, sit on the seat and position the ball of
your foot on the center of the pedal. Your knee should bend slightly at the
furthest pedal position. You should be able to pedal without locking your
knees or shifting your weight from side to side.
10