Connecting And Installing The Optical Cable Connection Box - Pioneer AVH-X8550BT Owner's Manual

Section
23 Connection
Connecting and installing the
optical cable connection box
WARNING
! Avoid installing the optical cable connection box
in locations where the operation of safety devices
such as airbags is prevented by this unit. Other-
wise, there is a danger of a fatal accident.
! Avoid installing the optical cable connection box
in locations where the operation of the brake
may be prevented. Otherwise, it may result in a
traffic accident.
! Fix the optical cable connection box securely
with the hook and loop fastener or lock tie. If the
unit is loose, it disturbs driving stability,which
may result in a traffic accident.
CAUTION
! Install this unit using only the parts supplied
with this unit. If other parts are used, this
unit may be damaged or could dismount it-
self, which leads to an accident or other
problems.
! Do not install this unit near the doors where
rainwater is likely to be spilled on the unit. In-
cursion of water into the unit may cause
smoke or fire.
Connecting the optical cable
1 Connect the optical cable and ground
lead to the main unit.
Connect the optical cable so that it does not pro-
trude from the main unit, as shown in the illus-
tration. Fasten the ground lead to the protrusion
on the back of the main unit.
54
En
1
1 Screw
2 Connect the optical cable to the optical
cable connection box.
1
1 Optical cable
Installing the optical cable
connection box
% When installing the optical cable connec-
tion box with the hook and loop fastener.
Install the optical cable connection box using
the hook and loop fastener in the ample space
of the console box.
1
2
1 Hook fastener
2 Loop fastener
Connection
% When installing the optical cable connec-
tion box with the lock tie.
Wrap the optical cable and connection box with
the protection tape and fasten with the power
code using the lock tie.
1
2
1 Wrap with the protection tape
2 Fasten with the lock tie