Unfolding The Seatback; Tilting The Full Bench Seat - GMC Yukon Denali 2003 Owner's Manual

Unfolding the Seatback

2. Push and pull on the seatback to check that it is
locked into place.
1-18
1. To return the seatback
to an upright position,
pull up on the
release lever labeled 1
and then pull up on
the seatback until
it locks into the upright
position.

Tilting the Full Bench Seat

{
CAUTION:
If the seatback isn't locked, it could move
forward in a sudden stop or crash. That could
cause injury to the person sitting there. Always
press rearward on the seatback to be sure it is
locked.
1. Fold the seatbacks forward using the instructions
listed previously.
2. Unlatch the seat from
the floor by pulling up
on the lever labeled 2
located on the rear
of the seat.