Tire Inspection And Rotation; When To Check - GMC Yukon Denali 2003 Owner's Manual

Hide thumbs Also See for Yukon Denali 2003:
Table of Contents

Advertisement

Notice: Don't let anyone tell you that underinflation
or overinflation is all right. It's not. If your tires
don't have enough air (underinflation), you can get
the following:
Too much flexing
Too much heat
Tire overloading
Bad wear
Bad handling
Bad fuel economy
If your tires have too much air (overinflation), you
can get the following:
Unusual wear
Bad handling
Rough ride
Needless damage from road hazards

When to Check

Check your tires once a month or more.
Also, check the tire pressure of the spare tire.
5-58
How to Check
Use a good quality pocket-type gage to check tire
pressure. You can't tell if your tires are properly inflated
simply by looking at them. Radial tires may look
properly inflated even when they're underinflated.
Be sure to put the valve caps back on the valve stems.
They help prevent leaks by keeping out dirt and
moisture.

Tire Inspection and Rotation

Tires should be rotated every 7,500 miles (12,500 km).
Any time you notice unusual wear, rotate your tires
as soon as possible and check wheel alignment. Also
check for damaged tires or wheels. See When It Is Time
for New Tires on page 5-60 and Wheel Replacement
on page 5-63 for more information.
Make sure the spare tire is stored securely. Push, pull,
and then try to rotate or turn the tire. If it moves,
use the wheel wrench and jack handle extensions to
tighten the cable. See Changing a Flat Tire on
page 5-66 .
The purpose of regular rotation is to achieve more
uniform wear for all tires on the vehicle. The first rotation
is the most important. See "Part A: Scheduled
Maintenance Services," in Section 6, for scheduled
rotation intervals.

Advertisement

Table of Contents
loading

This manual is also suitable for:

2003 yukon xl denali2003 yukon denali

Table of Contents