Table of Contents
Advertisement
STEERING WHEEL ADJUSTMENT
With the vehicle parked, push down the lever under the steering column to adjust the
steering wheel. The steering wheel can be moved up or down and in or out. Pull up the
lever to lock the steering wheel in place.
FRONT SEATS
POWER SEAT ADJUSTMENTS
A. Seat Adjustment
Move the horizontal control to slide the
seat forward or rearward, and to tilt, raise
or lower the seat.
B. Seatback Recline Adjustment
Move the top of the vertical control to
recline or raise the seatback.
C. Lumbar Support Adjustment
Press and hold the rear control to adjust
the lumbar support.
SET MEMORY SEAT POSITIONS
With the ignition On or in Accessory mode:
1. Adjust the seat and power outside mirrors
to the desired positions.
2. Press and release the SET button on the
driver's door. A beep will sound.
3. Immediately press and hold button 1 or 2 until two beeps sound.
To store a seat position for when exiting the vehicle, repeat these steps using the
button instead of button 1 or 2.
RECALL MEMORY SEAT POSITIONS
Press and hold button 1, 2 or
The memory/exit positions can be programmed to be recalled automatically.
To set Seat Entry Memory and Seat Exit Memory, go to Settings > Vehicle > Seating
Position.
FOLD-FLAT FRONT PASSENGER
SEATBACK
1. Lower the head restraint and move the
seat as far back as possible.
2. Lift the recline lever (D) and fold the seat-
back forward.
To raise the seatback, lift the recline lever
and fully raise the seatback.
6
Optional equipment
F
See Instruments and Controls in your Owner's Manual.
F
F
F
Exit until the seat and mirrors reach the set position.
See Seats and Restraints in your Owner's Manual.
A
B
C
D
Exit
Advertisement
Table of Contents
