Tilting The 50/50 Split Bench Seat - GMC Yukon Denali 2003 Owner's Manual

Tilting the 50/50 Split Bench Seat

1. Fold the seatbacks forward using the instructions
listed previously.
3. Lift the rear of the seat up from the floor and push it
forward until it locks into place. You will not be able
to unlatch the seat from the floor unless the
seatback is folded down.
The seat will now remain locked in the upright position.
2. Unlatch the seat from
the floor by pulling up
on the lever labeled 2,
located on the rear
of the seat.
Returning the Seat(s) to an Upright
Position
{
CAUTION:
If the seatback isn't locked, it could move
forward in a sudden stop or crash. That could
cause injury to the person sitting there. Always
press rearward on the seatback to be sure it is
locked.
To return the seatback to an upright position, do the
following:
1. Pull the lever labeled 3 toward you.
1-13