Removing The Fiber-Optic Cable Protective Caps; Inserting An Lc-Lc Fibre Channel Cable Into An Sfp Module - IBM TotalStorage DS4500 User Manual

2. If necessary, remove the protective cap from the SFP module, as shown in
Figure 49 on page 62. Save the protective cap for future use.
3. Remove the two protective caps from one end of the LC-LC cable as shown in
Figure 7. Save the protective caps for future use.
Figure 7. Removing the fiber-optic cable protective caps
4. Carefully insert that same end of the LC-LC cable into an SFP module that is
installed in a DS4500 Storage Server mini hub. The cable connector is keyed to
ensure it is inserted into the SFP module correctly. While you hold the
connector, push in the connector until it clicks into place.
Figure 8. Inserting an LC-LC Fibre Channel cable into an SFP module
7
Chapter 1. Introduction