Motorola ASTRO XTS 5000 III User Manual page 3

®
™
ASTRO XTS 5000
Digital Portable Radio, Model III
Quick Reference Card
Product Safety and RF Exposure Compliance
Before using this product, read the operating instructions
!
for safe usage contained in the Product Safety and RF
Exposure booklet enclosed with your radio.
a u t i o n
ATTENTION!
This radio is restricted to occupational use only to satisfy FCC RF
energy exposure requirements. Before using this product, read the
RF energy awareness information and operating instructions in the
Product Safety and RF Exposure booklet enclosed with your radio
(Motorola Publication part number 68P81095C98) to ensure
compliance with RF energy exposure limits.
Concentric
Switch
_ _ _ _ _ _
On/Off/
Volume Knob
Top Side
Button
_ _ _ _ _ _ _
Side Button 1
_ _ _ _ _ _ _
Side Button 2
_ _ _ _ _ _ _
PTT Button
4-Way
Navigation
Button
Home Button
Write your radio's programmed features on the dashed lines.
Radio On/Off
1 On - On/Off/Volume knob clockwise.
2 Off - On/Off/Volume knob counterclockwise.
Zones/Channels
1 Zone - Zone switch to desired zone.
2 Channel - Channel switch to desired channel.
Receive/Transmit
16-Position
1 Radio on and select zone/channel.
Select Knob
_ _ _ _ _ _ _
2 Listen for a transmission.
Top Button
- or -
_ _ _ _ _ _ _
Press and hold Volume Set button.
- or -
3-Position
Press Monitor button and listen for activity.
Switch
_ _ _ _ _ _ _
3 Adjust volume, if necessary.
Speaker/Mic
4 Press PTT to transmit; release to receive.
Display
Send Emergency Alarm
Menu Select
Radio on and press Emergency button.
Buttons
Display shows current zone/channel, and
App Button
EMERGENCY. Red LED lights; you hear short,
(TMS Button)
medium-pitched tone.
Note: To exit emergency at any time, press
Keypad
and hold Emergency button.
When acknowledgment is received, you hear
four beeps; alarm ends; radio exits emer-
gency.
Send Emergency Call
1 Radio on and press Emergency button.
Note: To exit emergency at any time, press
and hold Emergency button.
2 Press and hold PTT. Announce your
emergency into the microphone.
3 Release PTT to end call.
4 Press and hold Emergency button to exit
emergency.
Send Silent Emergency Alarm
1 Radio on and press Emergency button.
Display does not change; you see no LED;
you hear no tone.
Note: To exit emergency at any time, press
and hold Emergency button.
2 Silent emergency continues until you:
• Press and hold Emergency button to exit
emergency state.
- or -
• Press and release PTT to exit silent
emergency and enter regular emergency
(alarm, call, or alarm with call).