TITLE
Using Tracking function
Auto T
racking Function
Auto T
racking Function
* Auto Tracking Function
This function assures you of getting the best video quality by automatically adjusting the difference of horizontal size and
synchronization of the image.
This function resets system setting if the projector doesn't recognize the video system in VIDEO mode.
1
Press the
AUTO TRACKING
* Image positioning and synchronization are automatically adjusted.
2
Adjust [Clock] or [Phase] in TRACKING menu after operation of [Auto Tracking] if you want to
get better picture quality in accordance with diverse PC input modes. (Refer to page 46.)
* It's available to adjust [Clock], [Phase] in analog RGB mode only.
R
45
button.
Auto Tracking
* You can also use this function by using the
* It is best to perform this function while displaying a still image. Because you may not
get the best video quality on a moving image of PC graphic signal.
MENU
button.(PC mode)