Using Tracking Function - LG RL-JA10 Owner's Manual

Using Tracking function

Auto T racking Function
Auto T racking Function
* Auto Tracking Function
This function assures you of getting the best video quality by automatically adjusting the difference of horizontal width
and tremor of the image. This difference is caused by disaccord of the internal signal of the projector and diverse graph-
ic signals of PC.
1
Press the AUTO TRACKING
* Image positioning and tremor adjusting are automatically performed.
2
Adjust [Clock] or [Phase] in TRACKING menu after operation of [Auto Tracking] if you want to
get better picture quality in accordance with PC input modes. (Refer to page 44.)
* You can also use this function by using the
* Perform this function while on stopped image because you may not get the best
43
button.
Auto Tracking
mode)
video quality on a moving image of PC graphic signal.
MENU button.(RGB (PC)/Video 1/Video 2