Installation Instructions - LG RL-JT10 Owner's Manual

Installation Instructions

* Don't place the projector in the following conditions. It may cause malfunction or product damage.
Provide proper ventilation for this projector.
The projector is equipped with ventilation
holes(intake) on the bottom and ventilation
holes(exhaust) on the front. do not block or
place anything near these holes, or internal
heat build-up may occur, causing picture
degradation or damage to the projector.
Avoid impact to the projector.
Do not spill liquid of any kind into the
projector.
Use and keep this projector in suitable temperature and humidity conditions.
Install this projector only in a location where adequate temperature and humidity are controlled.
(refer p.62)
Don't place the projector where it can be covered with dust.
This may cause overheating of the projector. Clean the Air filter periodically.
19
R
R
R
R
Do not place the projector on a carpet, rug
or other similar surface. It may prevent
adequate ventilation to the projector
bottom. This product should be mounted
securely to a suitable bracket or stand.
Leave an adequate distance(30cm or more)
around the projector.
R
R