Table of Contents
Advertisement
Recording motion pictures
• Open the lens cover before turning the unit on.
-0
• Screen indications
"
Recording mode
e
Remaining time left for recording
When the remaining time is less than
1 minute, [R OhOOm] flashes red.
e
Recording time elapsed
Each time the unit enters the recording
pause mode, the counter display will be reset
to "OhOOmOOs".
..
1
Rotate the mode dial to select.
and open the LCD monitor.
2
Press the recording start/stop
button to start recording .
To end the recording
Press the recording start/stop button again.
• [e] and [II] are red during recording. Do not
move this unit until [II] is green.
• The images recorded between pressing the
recording start/stop button to start recording
and pressing it again to pause recording
become one scene.
The scene is automatically divided when the
recorded data exceeds 3.9 GB. (The recording
will continue.)
• When about 5 minutes have passed without
any operation in recording pause, the unit
automatically turns off to save battery life.
To use the unit, turn it on again.
This economy feature can also be set to [OFF].
(-+ 26, [ECONOMY])
• While motion picture recording is in progress,
the recording will not stop even if the LCD
monitor is closed.
• Do not disconnect the AC adaptor or remove
the battery if the unit is in recording mode. This
may cause a repair message to appear when
powered up again. (-+ 91, About recovery)
33
LSQT1488
Advertisement
Table of Contents
