Table of Contents
Advertisement
To use the zoom microphone
function
The zoom microphone is linked to the zooming
operation so that far-away sounds with a tele-
shot and close-up sounds with a wide-angle shot
are recorded more clearly.
o
Rotate the mode dial to select • .
Select the menu.
(~25)
I
[ADVANCED]
~
[ZOOM MIC]
~
[ON]
Recording yourself
o
Rotate the mode dial to select. or
Q.
Rotate the LCD monitor towards the
lens side.
• The image is horizontally flipped as if you see
a mirror image. (However the image recorded
is the same as a normal recording.)
• When the LCD monitor is rotated towards the
lens side, the icon will not be displayed even if
you press the joystick.
• Only some indications will appear on the
screen. When [[[]] appears, return the
direction of the LCD monitor to normal position
and check the warning/alarm indication.
(~
90)
Quick start
This unit will resume recording/pause mode
about 0.8 seconds after the LCD monitor is
reopened .
• When in Quick start standby mode about
60% of the power used in recording pause
mode is being consumed, so the recording
time will be reduced.
o
Rotate the mode dial to select. or
Q.
1
Select the menu.
(~
25)
I
[SETUP]
~
[QUICK START]
~
[ON]
2
Close the LCD monitor while the
mode dial is set to • or
Q.
The status indicator
0
flashes green and the unit
goes into quick start standby mode.
3
Open the LCD monitor.
The status indicator
0
lights red and the unit is
put into recording pause approx. 0.8 seconds
after it is turned on.
To cancel Quick start
Select [SETUP]
~
[QUICK START]
~
[OFF]
• The default setting is on.
• Quick start standby mode is canceled if
- about 5 minutes elapsed
-the mode dial is switched
- the battery is removed or the AC adaptor is
disconnected
39
LSQT1488
Advertisement
Table of Contents
